SDS Eyelash Adhesive (Black)

Product Name:

Posh Artsy Supplies Eyelash Adhesive (Black)

Product Use:

Attachment of artificial extensions

Report Date:

23/01/2023

Contact Information:

0429 441 093

Supplier/Manufacture:

19 Fleetwood-Smith Street, Nicholls ACT

Perfectly Posh Nails & Lashes PTY LTD.

Supplier:

Elana Bateman

This Safety Data Material Sheet was prepared in accordance with Un GHS REV.,7 the EU CLP REULATION (EC) No 1272/2013, and US OSH Hazard Communication Standards (29 CFR 1910.1200). Please refer to report attached.

Component

% By weight (approximate)

Ethyl Cyano Acrylate

>80%

Cyano Acrylate

>15%

Poly Alkyl Methacrylate

>10%

Poly Isocyanate

>10%

Pigment

>5%

Water

>1%

N-methyl Pyrrolidone

>0.5%

This product is a coloured, solvent borne Cyano Methacrylate

Inhalation: Vapour can cause headache, nausea, and irritation of the nose, throat, and lungs.

Eye: Contact with vapour or liquid may irritate the eyes

Skin: Slightly irritating to the skin

Ingestion: May cause pain, nausea, and vomiting. Seek medical attention.

Inhalation: Remove victim to fresh air and provide oxygen if breathing is difficult. Give artificial respiration if not breathing. Seek medical attention immediately.

Eye Contact: Immediately flush eyes with running water for at least 15 minutes. If redness, itching, or burning sensation occurs, seek medical attention.

Skin Contact: Remove contaminated clothing/shoes and wipe off excess from skin. Wash exposed area with soap and water. If redness, itching or burning sensation occurs, seek medical attention.

Ingestion: Get medical attention immediately

Note to Doctor: None for this material

Extinguishing Media: Use dry chemical, carbon dioxide, foam, or spray as appropriate for surrounding fire.

Fire Fighting Instructions: Do not enter any enclosed or confined fire space without full protective equipment, including self-contained breathing apparatus to protect against the hazardous effects of combustion products and oxygen deficiency.

Small Spills: Dike and absorb with inert material such as sand and remove all liquid with the use of a vacuum system. If unable to remove liquid, then begin to absorb with sand, saw dust or commercial absorbent, and scoop up and place into container for proper disposal. Keep spills and cleaning runoff out of the municipal sewers and open bodies of water. Decontaminate all clothing and the spill area with a detergent and large amount of water.

Large Spills: Use same method as above.

Handling Precautions: Avoid skin or eye contact. Avoid prolonged or repeated breathing of vapours and mists. If spilled on clothing, launder before reuse. Do not take internally. Use only in a well-ventilated area. Keep out of reach of children.

Storage Requirements: Keep from freezing. Product- will coagulate. Keep container tightly closed when not in use. Do not get in eyes, on skin or on clothing. Monomer vapours can evolve with material if heated. Containers, even those that have been emptied will retain product residue vapours and are subject to proper waste disposal.

Protective Clothing/Equipment: The use of gloves impermeable to the specific material handled is advised to prevent skin contact and possible irritation. Use chemical goggles if splashing may occur.

Physical State: Liquid

PH: N/A

Water Solubility: N/A

Boiling Point: 100C

Hazardous Decomposition Products: Thermal decomposition may yield acrylic monomer, carbon monoxide and carbon dioxide. Unidentified organic compounds in fumes and smoke may be formed during combustion.

Toxicity: Skin contact may cause burns, bond skin rapidly and skin and eye irritant.

Routes of Entry: Inhalation (YES), Skin (YES), Ingestion (YES)

Disposal: Dispose of unsured product or contaminated product and materials used in cleaning up spills or leaks in a manner approved for this material. Consult appropriate federal, states and local regulatory agencies to ascertain proper disposal procedures.

This information contained here is based upon data and information available to us, and reflects our best professional judgment, but is offered without guarantee or warranty. Neither our company nor any subsidiaries assume liability whatsoever for the accuracy of completeness of the information contained herein. All materials may present unknown. This information is furnished upon the condition that the person receiving it shall make their own determination of the suitability of the material for their particular use.